Fluxer M Series 20kVA ~ 160kVA

With extendable capacity up to 160 kVA / 160 kW in each closet and full DSP control technology, Fluxer M Series is the third generation of three phase high frequency modular UPS.

All internal modules (power module, charger module and monitor module) are modularly designed and hot swappable. In addition, they are constructed with small modules, assuring both system compactness and reliability.

Its full isolation design between fragile components and air flue makes the best of combination of reliability, functionality and flexibility. Moreover, this system adopts advanced ”N+X” wireless parallel and redundancy technology, avoiding single point failure, and further strengthening the reliability.

Category: Modular UPS

Characteristics
Technical Specifications

Characteristics

● High frequency online double-conversion with DSP control

● Hot swappable operation for all modules

● Inbuilt integrated PDU system, easy installation and economic initial investment

● Wide input voltage range, 50 Hz / 60 Hz auto sensing frequency

● Support two modes of frequency conversion: 50 Hz input / 60 Hz output and 60 Hz input / 50 Hz output

● Input power factor > 0.99, input THDi ≤ 3%, output THDV ≤ 5%

● Advanced “N+X” wireless parallel and redundancy technology easily set up different numbers of redundancy UPS module via LCD

● Inbuilt battery module available, 40 × 12 V / 9 Ah for each module

● Share battery pack in parallel operation, saving user’s battery cost

● System capacity up to 160 kVA / 160 kW constructed by each module 20 kVA / 20 kW, single charger module be equipped with 30 A charging current, 4 modules be configured maximally

● Flexible charger parameter and battery configuration setting, selectable battery number: 32 pcs / 34 pcs / 36pcs / 38 pcs / 40 pcs

● Advanced intelligent battery management technique, prolong the working life of battery effectively

● Support battery cold start and mains auto restart

● Complete isolation between key components and air duct effectively improve the system reliability

● Fragile components can be replaced easily as modules at low maintenance cost

● Front accessible maintenance, top / bottom cable entry compatible

● Perfect protection for hardware and software (C class lighting protection, circuit breaker, fuse, software and hardware protection), robust self detection, abundant event log for future check

● 5.7 inches LCD touch screen, friendly human machine interaction

● Standard emergency power off (EPO)

● Standard RS232/USB/RS485/dry contacts communication port

● Optional SNMP communication port

● Optional battery temperature compensation

Technical Specifications

MODEL	FLUM080T5T0		FLUM160T5T0
Capacity	80 kVA / 80 kW		160 kVA / 160 kW
Numbers of parallel module	1 ~ 4		1 ~ 8
Numbers of redundancy module	0 ~ 3		0 ~ 7
UPS power module	20 kVA / 20 kW
INPUT
Rated voltage	380 V / 400 V / 415 Vac
Voltage range	204 ~ 242 Vac (load ≤ 50%); 242 ~ 277 Vac (50% < load ≤ 70%); 277 ~ 520 Vac (70% < load ≤ 100%)
Rated frequency	50 / 60 Hz (auto-sense)
Frequency range	40 ~ 70 Hz
Power factor	≥ 0.99
Total harmonic distortion (THDI)	≤ 3%
Bypass voltage range	Rated output voltage – 40% ~ rated output voltage + 20% (settable via LCD)
OUTPUT
Voltage	380 V / 400 V / 415 Vac
Voltage regulation	± 1%
Frequency	Synchronized with utility in mains mode; 50/60Hz ± 0.1% in battery mode
Power factor	1.0
Waveform	Pure sine wave
Crest factor	3:1
Total harmonic distortion (THDV)	≤ 1% (linear load); ≤ 5% (non-linear load)
Transfer time	0 ms
Inverter overload capability	110% ~130%: transfer to bypass in 10 min; 130% ~ 150%: transfer to bypass in 1 min; > 150%: transfer to bypass in 0.5 s
Bypass overload capability	≤ 150%: long time running > 150%: power off in 10 s
BATTERIES
DC voltage	± 240 Vdc (options: ± 192 Vdc / ± 204 Vdc / ± 216 Vdc / ± 228 Vdc)
Inbuilt battery of standard model	40 × 12 V / 9 Ah for each module
Charging current	1 ~ 30 A / 60 A (settable via LCD)
SYSTEM
Efficiency	≥ 94%
Display panel	5.7 Inches LCD touch screen
Alarm	Battery mode, low battery, fans fault etc.
EMI	EN62040-2
EMS	IEC61000-4-2 (ESD)
	IEC61000-4-3 (RS)
	IEC61000-4-4 (EFT)
	IEC61000-4-5 (Surge)
COMMUNICAITONS
RS232 / RS485 / USB / dry contacts (standard)	Supports Windows® 98/2000/2003/XP/Vista/2008/7/8/10
SNMP (option)	Power management from SNMP manager and web browser
OTHERS
Humidity	0~95% RH @ 0~40℃ (non-condensing)
Noise level	≤ 60 dB
Module dimensions (W × D × H) (mm)	482 × 590 × 131
Module weight	28 kg / power module, 27 kg / charger module, 7 kg / monitoring module
UPS dimensions (W × D × H) (mm)	600 × 1000 × 1600	600 × 1000 × 2000
UPS packaged dimensions (W × D × H) (mm)	700 × 1070 × 1760	700 × 1070 × 2160
UPS Net / Gross weight (kg) Without inbuilt battery and power module	225 / 245	290 / 310
Input / output / bypass breaker	Yes	Yes

Fluxer M Series 20kVA ~ 160kVA

Characteristics

Technical Specifications

Related products

Fluxer M Series 25KVA ~ 125KVA

Fluxer M Series 50KVA~600KVA